Spraygun Choice for Applying Primer Pros recommend a pressure-pot system over an air-assisted airless setup if all you're doing is applying primer. The cheaper guns typically won't have these options available. Get free shipping on qualified Wood Zinsser Spray Primer or Buy Online Pick Up in Store today in the Paint department. Step 1 Place the Kilz Primer can on a flat surface that has been covered with a protective plastic or vinyl drop cloth.

Make sure the primer you choose can be used on a variety of materials, including wood, steel, fiberglass, and even plastic. 96 The can says it can be sprayed, so I used an HVLP gun, installed a 2.0mm tip/needle, and started spraying.

You get what you get. In practice you can just spray the wood using the finish colour and forget about a primer. Most people paint the primer on with a brush but there is an alternative. 39

It can be used on wood and brick surfaces too. The mixture should be enough to let it easily flow through the nozzle. Fill the spray gun partially with the undiluted primer, if the label does not specify a ratio.

The HVLP gravity feed spray gun is the most efficient and popular type of spray gun today.

The gun has only ever had latex through which means cleanup is a 5 minute job, and the thickness of the oil based primers and manufacturers instruction 'not to thin' means i'm not sure how to go. If you spray correctly, you can achieve a very solid base level for your top coats of paint.

If you want your paint job to look its best, you need the right HVLP gun to spray it, and Eastwood has everything for hobbyist or the old pro.
Generally a 2.0 -2.4 tip is used for primers. ... Not a good gun if you spray in three dimensions. Products. NON-SKID COATINGS. Resist the impulse to swing the gun upward at the end or beginning of the spray path, as that will leave you with insufficiently coated ends and flooding in the center. Google Primer Spray Gun. Rust-Oleum Primer Spray, 13-Ounce (Corporation 02008) This primer can get you about 20% more coverage than the previous one. This should be made for effective spraying of color and to achieve a smooth finish. If you spray everything flat, it's bulletproof.

Kilz Primer is a heavy-duty primer that can be brushed, rolled or sprayed on a surface, however, due to its viscosity the product must be thinned down for use in a paint sprayer. Whether you are a do-it-yourself (DIY) enthusiast or a professional at painting, you need a good paint mixing procedure.

Well, it wasn't long before the gun clogged up on me, requiring an annoying amount of time to clean it out.

Problem is i am wary of running oil primer through the HLVP spray gun.

One huge downside is the outrageous prices for gaskets and the like.
Some spray-gun and finish manufacturers provide a suggested air pressure, and you may find this works fine for you. It is very easy to work with and will atomise much better than standard water or oil based paints.

... CP-10 is a two-part, one-to-one mix, water-based primer used for concrete, wood, fiberglass, and painted surfaces. Using the correct type of primer is vital to the area you are painting. it is more expensive though but IMHO the costs are out weighed by the advantages (speed of drying, ease of use, durability and non yellowing). Spray the primer onto a test board to evaluate its thickness. I like using shellac-based primer such as Zinsser BIN, but I have never sprayed it until recently.