The answer is: The change of 1 m3 (cubic meter) unit of a gold amount equals = to 19,282.00 kg - kilo (kilogram) as the equivalent measure for the same gold type. The typical density of common metals can be found listed in the table below. 3 by 1728; for g/cm 3, multiply density in lb/in. The densities of rocks and minerals are normally expressed as specific gravity, which is the density of the rock relative to the density of water. The standard units for density are kg/m 3 but density can also be recorded as specific gravity which is the density of the material divided by the density of water (1000 kg/m 3).

Density is defined as the mass per unit volume. As found through that equation, the density of gold is 19,300 kg/m 3. However, there are interesting facts about Gold that most don't know about.

In the case of Gold, density is 19.32 g/cm³.

Conversions: For density in lb/ft 3, multiply lb/in.

This isn't as complex as you may think because water's density is 1 gram per cubic centimeter or 1 g/cm 3 . What is the density of gold - Answers The density of solid pure gold is about 19.32 g/cm3 or 19,320 kg/m3 (approximately 19.3 times more dense than water). 3 by 27679.9 3 by 27.68; for kg/m 3, multiply density in lb/in. To see how density of materials is calculated, click here.If you find this … Densities of Metals and Elements Table. Units. Engineering Materials. Densities of Metals and Elements Table . Density of selected materials (~20 °C, 1 atm) … Gold has a density of 19.3 g/cm 3, almost identical to that of tungsten at 19.25 g/cm 3; as such, tungsten has been used in counterfeiting of gold bars, such as by plating a tungsten bar with gold, or taking an existing gold bar, drilling holes, and replacing the removed gold with tungsten rods.

1000 kg/m 3 = 1000 g/l = 1 g/cm 3.